Railroad Track Inspection and Safety Standards old
When - Where
November 2-6, 2015
(8:00 a.m. - 5:00 p.m. Eastern Time)
Tennessee Valley Railroad Museum
4121 Cromwell Road
Chattanooga, TN 37421
Tel: 865-974-5255 for directions
Register ONLINE here.
Register by fax or mail. Click here to download the brochure.
What this is about
Track is the foundation of the railroad's physical plant. Although railroad track components are relatively simple in concept, they interact in a complex fashion to form a system capable of withstanding the extremely large forces applied by rail vehicles. Safe and reliable train operations rely upon the track system remaining within established specifications. Because the combined effects of traffic and environment degrade track, regular inspection is essential to identify defects and initiate remedial action before problems develop. This course describes track defects and acceptable corrective actions, presents a recommended methodology for conducting inspections, and discusses in depth the Federal Track Safety Standards in 49 CFR, Part 213.
Objectives and Benefits
In this class, you will
- learn how to organize, conduct, and document track inspections;
- learn how to measure track parameters;
- develop a clear understanding of the Federal Track Safety Standards and the FRA track inspection process; and
- learn how to use inspection results to identify track maintenance needs and plan maintenance activities.
This course has been reviewed and approved by the Federal Railroad Administration (FRA) under CFR Part 243 of the new training rule. This course is intended for safety-related railroad employees or independent students who seek employment with a railroad and/or a railroad contractor and who may be tasked with the application of Federal regulation 49 CFR Part 213, Track Safety Standards, Subparts A-F. The course does not contain an on-the-job training (OJT component). This is the only comprehensive course on track inspection providing sufficient time to discuss this complex subject in detail and to demonstrate the measurement techniques needed. Hundreds of attendees through the years have increased their understanding of the track inspection process as a result of this class.
INSTRUCTORSDavid B. Clarke, P.E.
Dr. Clarke is the Director the Center for Transportation Research and a research associate professor in the Department of Civil and Environmental Engineering at the University of Tennessee. His over 30 years of experience encompass a variety of railroad related design, inspection, research and education activities. He has taught railway related courses including this one, to college students and professionals since 1990. Dr. Clarke is well versed in the Federal Track Safety Standards covered in this course, and is frequently engaged as an expert to assess track conditions. As a licensed civil engineer, Dr. Clarke prepares specifications and designs for railroad track construction and maintenance. He is a licensed civil engineer in South Carolina and Tennessee and is active in AREMA, ASCE and TRB.
Dean A. Hollingsworth
Dean Hollingsworth was a Field Liaison Specialist (1994-1996) and Track Safety Specialist (1996- 2014) with the Federal Railroad Administration before he retired in 2014. He was assigned to the Field Liaison Team which was responsible for leading the cultural transformation within the Federal Railroad Administration. When he was with the Safety Improvement and Development Team in the Federal Railroad Administration, he was charged with the responsibility for coordination and facilitation of a full range of programs, policies, projects, and initiatives which impact railroad safety and FRA policy. He provided assistance in ensuring uniform interpretation and enforcement of safety regulations and rules by Federal and State inspectors through technical training. Dean has received 19 FRA awards, five community awards, and six letters of commendation from outside organizations. He earned his Langevin Certifications in 2000-05.
Who Should Attend
Track inspection personnel from shortline, regional, and Class I railroads; railroad contractors and consultants; state and local government officials associated with railroad operation, finance, and regulation; and railway engineers have all benefited from attending this workshop.
The workshop begins each day at 8:00am. Activities on days 1-4 end no later than 5:00pm; day 5 will be completed by 11:00am.
Introduction and overview
Part 213 Subpart A-General
Part 213 Subpart B-Roadbed
Part 213 Subpart C-Track Geometry
Part 213 Subpart C-Track Geometry (cont.)
Part 213 Subpart D-Track Structure
Field Exercises - Geometry Measurement
Part 213 Subpart D-Track Structure (cont.)
Part 213 Subpart E-Track Appliances
Part 213 Subpart F-Inspection
The Inspection Process
Field Inspection and Review
Review and Conclusion
The course registration of $725 includes course materials. Registration fees must be received to guarantee your place in the class. Attendees are responsible for meals and lodging. Registrants will be provided information on available lodging in the course vicinity.
Because this workshop is designed to be hands-on, registrants should bring approved safety footwear for field track inspection activities. Attendees who possess track inspection tools, such as a track level or stringline, are encouraged to bring them. Pocket calculators will be helpful in certain exercises. Field exercises are conducted rain or shine.
If you cannot attend, notification by October 19, 2015 is required. You may enroll a substitute at any time before the course starts. There will be no refunds for no-shows.
To insure that the facilities will comfortably accommodate all participants, this workshop will be limited to 35 participants.
27 Professional Development Hours (PDHs) are available for those completing the course. All attendees who successfully finish the course receive a certificate of completion.
Register ONLINE here.
Click here to download the brochure and fax or mail it in.